1. low-profile 0.5mm pitch fpc/ffc connectors miniaturization of portable equipment and personal mobile devices has created increased demand for a low profile, high density, and high reliability connectors. * the design of this connector has been made thinner and smaller, with a height of 0.9mm and width of 3mm. * pcb footprint: reduced approximately 48% (as compared with hirose electric's 0.5mm pitch fh12 series connectors) * connector weight: reduced approximately 78% (as compared with hirose electric's 0.5mm pitch fh12 series connectors) 2. conductive traces on the pcb can run under the connector all bottom surface of the connector is solid, without any exposure of the contact. 3. proven flip-lock actuator system assures easy and reliable operation rotating actuator permits easy insertion and reliable connection with the fpc & ffc. tactile sensation confirms complete mechanical locking of the actuator and the electrical connection. 4. accepts 0.2mm & 0.3mm thick fpc/ffc no exposed contacts on the bottom of the connector. the connector will also terminate with 0.2mm thick flat flexible cable (ffc). 5. board placement with automatic equipment flat upper surface and tape and reel packaging facilitate vacuum pick-up and placement. standard reel packaging contains 5000 connectors. 6. halogen-free * (fh19c,fh19sc(11 to 50pos.)) * as defined by iec61249-2-21 br-900ppm maximum, cl-900ppm maximum, 1 0.5mm pitch, 0.9mm above the board, flexible printed circuit & flexible flat cable zif connectors fh19c & fh19sc series 2010.9 0.9mm 3mm 17mm can be mounted over conductive traces 0.9mm high metal fittings (leadless type) no protrusions on the sides allows close side-by-side board placement. metal fittings (leadless) enclosed construction (no exposed contacts) actuator color: brown actuator color: black fh19sc ?fpc/ffc thickness: 0.3 0.03mm actuator temporary hold mechanism actuator stays open during insertion of the fpc/ffc. features t h e p r o d u c t i n f o r m a t i o n i n t h i s c a t a l o g i s f o r r e f e r e n c e o n l y . p l e a s e r e q u e s t t h e e n g i n e e r i n g d r a w i n g f o r t h e m o s t c u r r e n t a n d a c c u r a t e d e s i g n i n f o r m a t i o n .
2 fh19c & fh19sc series 0.5mm pitch, 0.9mm above the board, flexible printed circuit & flexible flat cable zif connectors fh 19 c - 30s - 0.5 sh (05) 1 2 3 4 5 7 6 product specifications rating current rating 0.5 a ( note1 ) voltage rating 50 v ac operating temperature range -55 ? to + 85 ? (note 2) operating humidity range relative humidity 90% max. (no condensation) storage temperature range -10 ? to + 50 ? (note 3) storage humidity range relative humidity 90% max. (no condensation) materials note 1: when passing the current through all of the contacts, use 70% of the current rating. note 2: includes temperature rise caused by current flow. note 3: the term ?torage?refers to products stored for long period of time prior to mounting and use. operating temperature range and humidity range covers non- conducting condition of installed connectors in storage, shipment or during transportation.information note 4: information contained in this catalog represents general requirements for this series. contact us for the drawings and specifications for a specific part number shown. item specification conditions 1. insulation resistance 500 m ohms min. 100 v dc 2. withstanding voltage no flashover or insulation breakdown 150 v ac/1 minute 3. contact resistance 100 m ohms max. 1 ma *including fpc/ffc conductor resistance 4. durability contact resistance: 100 m ohms max. 20 cycles (insertion/ withdrawal) no damage, cracks, or parts dislocation. no electrical discontinuity of 1 s or more. 5. vibration contact resistance: 100 m ohms max. no damage, cracks, or parts dislocation. no electrical discontinuity of 1 s. min. 6. shock contact resistance: 100 m ohms max. no damage, cracks, or parts dislocation. 7. humidity contact resistance: 100 m ohms max. (steady state) insulation resistance: 100 m ohms min. no damage, cracks, or parts dislocation. contact resistance: 100 m ohms max. 8. temperature cycle insulation resistance: 100 m ohms min. no damage, cracks, or parts dislocation. 9. resistance to no deformation of components affecting performance. reflow: at the recommended temperature profile soldering heat manual soldering: 350?5? for 5 seconds 96 hours at temperature of 40 ? and humidity of 90 to 95% temperature: -55 ? / + 15 ? to + 35 ? / + 85 ? / + 15 ? to + 35 ? time : -30 / 2 to 3 / + 30 / 2 to 3(minutes) 5 cycles acceleration of 981 m/s 2 , 6 ms duration, sine half- wave waveform, 3 cycles in each of the 3 axis. frequency: 10 to 55 hz, single amplitude of 0.75mm, 10 cycles in each of the 3 directions ordering information recommended fpc, ffc fh19c series fh19sc series thickness: = 0.2 0.03mm gold plated thickness: = 0.3 0.03mm gold plated insulator lcp color: beige actuator pps/lcp ul94v-0 contacts phosphor bronze gold plated ------- metal fittings phosphor bronze pure tin reflow plated ------- part material finish remarks color: brown (fh19c series) color: black (fh19sc series) series name : fh series no. : 19 c : fpc/ffc thickness : 0.2mm sc : fpc/ffc thickness : 0.3mm no. of contacts : 4 to 50 contact pitch : 0.5mm terminal type sh: smt horizontal mounting type material and plating specifications : 1 2 5 3 6 4 7 actuator material fh19c fh19sc 4 to 10 pos. fh19sc 11 to 50 pos. contact: gold plated contact: gold plating with nickel barrier contact: gold plated contact: gold plating with nickel barrier contact: gold plated contact: gold plating with nickel barrier pps lcp ------ ------ (05) (06) ------ ------ (05) (10) ------ ------ (05) (09) halogen free yes no yes t h e p r o d u c t i n f o r m a t i o n i n t h i s c a t a l o g i s f o r r e f e r e n c e o n l y . p l e a s e r e q u e s t t h e e n g i n e e r i n g d r a w i n g f o r t h e m o s t c u r r e n t a n d a c c u r a t e d e s i g n i n f o r m a t i o n .
3 fh19c & fh19sc series0.5mm pitch, 0.9mm above the board, flexible printed circuit & flexible flat cable zif connectors connector dimension [ fh19c series ] d0.1 a (1) 2.50.15 (0.5) 0.5 b a0.15 (c: fpc insertion slot dimension) (0.15) (0.15) 0.5 +0.15 0 (1.6) 0.90.1(including contact terminal leads) (1.3) (130) 2.150.2 0.15max 0.15max 1 12 2 3 s 0.15 g polarizing mark indicator number of contacts indicator g number of contacts 1 2 3 4 5 6 notes the coplanarity of each terminal lead and metal fitting is within 0.1 the contact terminal lead position indicates the dimension from the bottom surface of the insulator body. difference between terminal contact to be max. 0.1mm. packaged on tape and reel only. check packaging specification. any discoloration of the plastic compound will not affect form, fit or function of the connector. after reflow, the terminal plating may change color, however this does not represent a quality issue. unit: mm note1: embossed tape reel packaging (5,000 pieces/reel). order by number of reels. note2: **specification. refer to ordering information. part number fh19c-04s-0.5sh(**) fh19c-05s-0.5sh(**) fh19c-06s-0.5sh(**) fh19c-07s-0.5sh(**) fh19c-08s-0.5sh(**) fh19c-09s-0.5sh(**) fh19c-10s-0.5sh(**) fh19c-12s-0.5sh(**) fh19c-13s-0.5sh(**) fh19c-15s-0.5sh(**) fh19c-17s-0.5sh(**) fh19c-20s-0.5sh(**) fh19c-21s-0.5sh(**) fh19c-24s-0.5sh(**) fh19c-27s-0.5sh(**) fh19c-30s-0.5sh(**) fh19c-34s-0.5sh(**) fh19c-40s-0.5sh(**) fh19c-50s-0.5sh(**) cl no. 580-0410-1-** 580-0418-3-** 580-0409-2-** 580-0411-4-** 580-0404-9-** 580-0403-6-** 580-0412-7-** 580-0413-0-** 580-0405-1-** 580-0406-4-** 580-0408-0-** 580-0402-3-** 580-0414-2-** 580-0407-7-** 580-0401-0-** 580-0400-8-** 580-0419-6-** 580-0416-8-** 580-0417-0-** number of contacts 4 5 6 7 8 9 10 12 13 15 17 20 21 24 27 30 34 40 50 a 4 4.5 5 5.5 6 6.5 7 8 8.5 9.5 10.5 12 12.5 14 15.5 17 19 22 27 b 1.5 2 2.5 3 3.5 4 4.5 5.5 6 7 8 9.5 10 11.5 13 14.5 16.5 19.5 24.5 c 2.57 3.07 3.57 4.07 4.57 5.07 5.57 6.57 7.07 8.07 9.07 10.57 11.07 12.57 14.07 15.57 17.57 20.57 25.57 d 3.35 3.85 4.35 4.85 5.35 5.85 6.35 7.35 7.85 8.85 9.85 11.35 11.85 13.35 14.85 16.35 18.35 21.35 26.35 t h e p r o d u c t i n f o r m a t i o n i n t h i s c a t a l o g i s f o r r e f e r e n c e o n l y . p l e a s e r e q u e s t t h e e n g i n e e r i n g d r a w i n g f o r t h e m o s t c u r r e n t a n d a c c u r a t e d e s i g n i n f o r m a t i o n .
a polarizing mark indicator number of contacts indicator (130) 0.15 g d0.1 (1) 2.50.15 (0.5) g number of contacts 0.5 b a0.15 (c: fpc insertion slot dimension) (0.15) (0.15) 0.5 +0.15 0 (1.6) 0.930.1(i ncluding contact terminal leads) (1.3) 2.150.2 0.15max 0.15max s 1 12 2 3 5 [ fh19sc series ] note1: embossed tape reel packaging (5,000 pieces/reel) . order by number of reels. note2: **specification. refer to ordering information. notes the coplanarity of each terminal lead and metal fitting is within 0.1 the contact terminal lead position indicates the dimension from the bottom surface of the insulator body. difference between terminal contact to be max. 0.1mm. any discoloration of the plastic compound will not affect form, fit or function of the connector. the contacts are protruding. 0.03mm max. from the housing top surface. packaged on tape and reel only. check packaging specification. after reflow, the terminal plating may change color, however this does not represent a quality issue. 1 2 3 4 5 6 7 unit: mm part number fh19sc-04s-0.5sh(**) fh19sc-05s-0.5sh(**) fh19sc-06s-0.5sh(**) fh19sc-08s-0.5sh(**) fh19sc-09s-0.5sh(**) fh19sc-10s-0.5sh(**) fh19sc-12s-0.5sh(**) fh19sc-13s-0.5sh(**) fh19sc-14s-0.5sh(**) fh19sc-15s-0.5sh(**) fh19sc-16s-0.5sh(**) fh19sc-17s-0.5sh(**) fh19sc-18s-0.5sh(**) fh19sc-20s-0.5sh(**) fh19sc-21s-0.5sh(**) fh19sc-22s-0.5sh(**) fh19sc-24s-0.5sh(**) fh19sc-26s-0.5sh(**) fh19sc-27s-0.5sh(**) fh19sc-28s-0.5sh(**) fh19sc-30s-0.5sh(**) fh19sc-32s-0.5sh(**) fh19sc-40s-0.5sh(**) fh19sc-45s-0.5sh(**) fh19sc-50s-0.5sh(**) cl no. 580-0517-5-** 580-0515-0-** 580-0501-5-** 580-0520-0-** 580-0507-1-** 580-0508-4-** 580-0512-1-** 580-0518-8-** 580-0509-7-** 580-0503-0-** 580-0521-2-** 580-0504-3-** 580-0519-0-** 580-0502-8-** 580-0505-6-** 580-0506-9-** 580-0511-9-** 580-0510-6-** 580-0516-2-** 580-0513-4-** 580-0500-2-** 580-0514-7-** 580-0522-5-** 580-0523-8-** 580-0524-0-** number of contacts 4 5 6 8 9 10 12 13 14 15 16 17 18 20 21 22 24 26 27 28 30 32 40 45 50 a 4 4.5 5 6 6.5 7 8 8.5 9 9.5 10 10.5 11 12 12.5 13 14 15 15.5 16 17 18 22 24.5 27 b 1.5 2 2.5 3.5 4 4.5 5.5 6 6.5 7 7.5 8 8.5 9.5 10 10.5 11.5 12.5 13 13.5 14.5 15.5 19.5 22 24.5 c 2.57 3.07 3.57 4.57 5.07 5.57 6.57 7.07 7.57 8.07 8.57 9.07 9.57 10.57 11.07 11.57 12.57 13.57 14.07 14.57 15.57 16.57 20.57 23.07 25.57 d 3.35 3.85 4.35 5.35 5.85 6.35 7.35 7.85 8.35 8.85 9.35 9.85 10.35 11.35 11.85 12.35 13.35 14.35 14.85 15.35 16.35 17.35 21.35 23.85 26.35 4 fh19c & fh19sc series 0.5mm pitch, 0.9mm above the board, flexible printed circuit & flexible flat cable zif connectors t h e p r o d u c t i n f o r m a t i o n i n t h i s c a t a l o g i s f o r r e f e r e n c e o n l y . p l e a s e r e q u e s t t h e e n g i n e e r i n g d r a w i n g f o r t h e m o s t c u r r e n t a n d a c c u r a t e d e s i g n i n f o r m a t i o n .
5 fh19c & fh19sc series0.5mm pitch, 0.9mm above the board, flexible printed circuit & flexible flat cable zif connectors unit: mm 4 5 6 7 8 9 10 12 13 14 15 16 17 18 4.0 4.5 5.0 5.5 6.0 6.5 7.0 8.0 8.5 9.0 9.5 10.0 10.5 11.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.5 6.0 6.5 7.0 7.5 8.0 8.5 3.1 3.6 4.1 4.6 5.1 5.6 6.1 7.1 7.6 8.1 8.6 9.1 9.6 10.1 3.9 4.4 4.9 5.4 5.9 6.4 6.9 7.9 8.4 8.9 9.4 9.9 10.4 10.9 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.5 7.0 7.5 8.0 8.5 9.0 9.5 number of contacts a j b k l b 0.30.05 (land) 0.5 0.80.05 0.250.05 (metal mask) 0.1 h h number of contacts (0.15) (0.15) (0.15) (0.15) (3) (2.5) (a) j0.1 k0.1 0.80.05 3.30.05 (0.2) (0.05) ( x ) 0.20.03 3.5 min. (stiffener) 0.30.03 3.5 min. (stiffener) 2-r0.2 0.50.07 b0.03 0.50.03 l0.05 fh19c series fh19sc series 0.350.03(fpc) 0.30.03(ffc) 2.50.3 (exposed traces) recommended pcb land and metal mask dimensions [common to fh19c & fh19sc series] recommended fpc, ffc dimensions [ common to fh19c & fh19sc series] recommended metal mask thickness: 0.10 mm. note 1: stiffener dimension should be 3.5mm min., and x dimension should be 0.5mm for improved flexibility of fpc. unit: mm 20 21 22 24 26 27 28 30 32 34 40 45 50 12.0 12.5 13.0 14.0 15.0 15.5 16.0 17.0 18.0 19.0 22.0 24.5 27.0 9.5 10.0 10.5 11.5 12.5 13.0 13.5 14.5 15.5 16.5 19.5 22.0 24.5 11.1 11.6 12.1 13.1 14.1 14.6 15.1 16.1 17.1 18.1 21.1 23.6 26.1 11.9 12.4 12.9 13.9 14.9 15.4 15.9 16.9 17.9 18.9 21.9 24.4 26.9 10.5 11.0 11.5 12.5 13.5 14.0 14.5 15.5 16.5 17.5 20.5 23.0 25.5 number of contacts a j b k l t h e p r o d u c t i n f o r m a t i o n i n t h i s c a t a l o g i s f o r r e f e r e n c e o n l y . p l e a s e r e q u e s t t h e e n g i n e e r i n g d r a w i n g f o r t h e m o s t c u r r e n t a n d a c c u r a t e d e s i g n i n f o r m a t i o n .
6 fh19c & fh19sc series 0.5mm pitch, 0.9mm above the board, flexible printed circuit & flexible flat cable zif connectors fh19c & fh19sc series fpc/ffc construction (recommended specifications) 1. using single-sided fpc 2. using double-sided fpc 3. using ffc (flexible flat cable) 4. precautions fpc : flexible printed circuit material name copper foil base adhesive base film reinforcement material adhesive material thickness ( m) fh19c fh19sc cu 1oz thermosetting adhesive polyimide 1 mil thick thermosetting adhesive covering layer film cover adhesive polyimide 1 mil thick 35 25 25 30 35 25 25 30 (25) (25) (25) (25) fpc : flexible printed circuit through-hole copper copper foil base adhesive base film base adhesive copper foil cover adhesive covering layer film reinforcement material adhesive stiffener cu 1/2oz thermosetting adhesive polyimide 1 mil thick thermosetting adhesive polyimide fh19c : 1mil fh19sc: 4mil 18 25 25 25 25 18 25 25 50 100 cu cu 1 /2oz thermosetting adhesive polyimide 1 mil thick 15 18 18 25 18 15 18 18 25 18 material name covering layer film cover adhesive surface treatment material polyimide 1 mil thick nickel under plated 1 to 5m / gold plated 0.2m thickness ( m) fh19c (25) (25) 3 fh19sc (25) (25) 3 ffc : flexible flat cable (nickel under plated / gold plated), soft copper film adhesive polyester adhesive stiffener polyester film adhesive * practical tolerance of thickness dimension is 20m (i.e., 187 to 227m). 1. this specification is a recommendation for the construction of the fh19c/ series fpc and ffc (t=0.2 0.03). 2. for details about the construction, please contact the fpc/ffc manufacturers. polyester polyester polyester total polyester thermoplastic type (12) (30) 35 30 12 30 100 207 (12) (30) 35 30 12 30 188 295 material name material thickness ( m) fh19c fh19sc surface treatment stiffener nickel under plated 1 to 5m / gold plated 0.2m polyimide fh19c : 3mil fh19sc: 7mil 3 75 175 3 total 193 293 total 197 297 t h e p r o d u c t i n f o r m a t i o n i n t h i s c a t a l o g i s f o r r e f e r e n c e o n l y . p l e a s e r e q u e s t t h e e n g i n e e r i n g d r a w i n g f o r t h e m o s t c u r r e n t a n d a c c u r a t e d e s i g n i n f o r m a t i o n .
7 fh19c & fh19sc series0.5mm pitch, 0.9mm above the board, flexible printed circuit & flexible flat cable zif connectors m0.3 1.750.1 80.1 20.15 40.1 n0.1 ?1.5 +0.1 0 (0.3) (1) (q) (1.7) (3.3) (4.3) unreeling direction flat surface for placement with automatic equipment end cection mounting cection lead cection (400 mm min.) embossed carrier tape blank cection blank cection top cover tape (10 pockets min.) (10 pockets min.) (?80) (?380) (?13) (r:inside) (t:outside) packaging specifications [common to fh19c & fh19sc series] reel dimensions note: 5,000 pieces per reel. embossed tape 32 mm or wider will have perforated feed holes on two sides. embossed carrier tape dimensions unit: mm 4 5 6 7 8 9 10 12 13 14 15 16 17 18 16 16 16 16 16 16 16 16 16 16 16 24 24 24 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 11.5 11.5 11.5 4.3 4.8 5.3 5.8 6.3 6.8 7.3 8.3 8.8 9.3 9.8 10.3 10.8 11.3 17.4 17.4 17.4 17.4 17.4 17.4 17.4 17.4 17.4 17.4 17.4 25.4 25.4 25.4 21.4 21.4 21.4 21.4 21.4 21.4 21.4 21.4 21.4 21.4 21.4 29.4 29.4 29.4 number of contacts m q n r t unit: mm 20 21 22 24 26 27 28 30 32 34 40 45 50 24 24 24 24 24 24 24 24 32 32 44 44 44 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 14.2 14.2 20.2 20.2 20.2 12.3 12.8 13.3 14.3 15.3 15.8 16.3 17.3 18.3 19.3 22.3 24.8 27.3 25.4 25.4 25.4 25.4 25.4 25.4 25.4 25.4 33.4 33.4 45.4 45.4 45.4 29.4 29.4 29.4 29.4 29.4 29.4 29.4 29.4 37.4 37.4 49.4 49.4 49.4 number of contacts m q n r t t h e p r o d u c t i n f o r m a t i o n i n t h i s c a t a l o g i s f o r r e f e r e n c e o n l y . p l e a s e r e q u e s t t h e e n g i n e e r i n g d r a w i n g f o r t h e m o s t c u r r e n t a n d a c c u r a t e d e s i g n i n f o r m a t i o n .
recommended temperature profile [for fh19c & fh19sc series] hrs test condition solder method :reflow, ir/hot air solder composition :paste, 96.5%sn/3.0%ag/0.5%cu (senju metal industry, co., ltd.s part number:m705-221cm5-32-10.5) test board : glass epoxy 45mm100mm1.6mm thick land dimensions :0.3mm0.8mm metal mask :0.25mm0.8mm0.1mm this temperature profile is based on the above conditions. in individual applications the actual temperature may vary, depending on solder paste type, volume/thickness and board size/thickness. consult tour solder paste and equipment manufacturer for specific recommendations. max 250? start time (seconds) 25? (60 sec.) (60 sec.) 90 sec. to 120 sec. preheating soldering 0 50 100 150 150? 200? 230? 200 250 temperature(?) 8 fh19c & fh19sc series 0.5mm pitch, 0.9mm above the board, flexible printed circuit & flexible flat cable zif connectors t h e p r o d u c t i n f o r m a t i o n i n t h i s c a t a l o g i s f o r r e f e r e n c e o n l y . p l e a s e r e q u e s t t h e e n g i n e e r i n g d r a w i n g f o r t h e m o s t c u r r e n t a n d a c c u r a t e d e s i g n i n f o r m a t i o n .
9 fh19c & fh19sc series0.5mm pitch, 0.9mm above the board, flexible printed circuit & flexible flat cable zif connectors operation and precations operation precautions fpc conductor surface (bottom side) 1. fpc/ffc termination procedure. connector installed on the board. 1) lift up the actuator. use thumb or index finger. 3) rotate down the actuator until firmly closed. it is critical that the inserted fpc/ffc is not moved and remains fully inserted. should the fpc/ffc be moved, open the actuator and repeat the process, starting with step 1 above. 2) the connector will assure reliable performance when the actuator is open to 130 maximum. do not exceed this angle, as this may cause permanent damage to the connector. 2. fpc/ffc removal 1) lift up the actuator. 2) carefully remove the fpc/ffc. 2) assure that the fpc/ffc is fully inserted parallel to mounting surface, with the exposed conductive traces facing down. 1) do not apply excessive force or use any type of tool to operate the actuator. 3) application of excessive force to the inserted fpc/ffc may cause damage to connector and may affect the reliability of electrical connection. if specific application requires continuous or repeated pull or bend of the inserted fpc/ffc, assure that the forces are not transmitted directly to the connector. t h e p r o d u c t i n f o r m a t i o n i n t h i s c a t a l o g i s f o r r e f e r e n c e o n l y . p l e a s e r e q u e s t t h e e n g i n e e r i n g d r a w i n g f o r t h e m o s t c u r r e n t a n d a c c u r a t e d e s i g n i n f o r m a t i o n .
|
